Dolphin M600 Robot Pool Cleaner: Features, Pros, and Cons
Pool ownership comes with the lifetime responsibility of keeping the water clean and ensuring that the accessories are in perfect condition. Cleaning the pool is no fun at all; it’s a tiresome and time-consuming task. If you’re going to do all the skimming, scrubbing, and vacuuming, it can take away your valuable time for yourself and your family.
A robotic pool cleaner is an excellent helper for the pool maintenance task. This automatic device does most of the scrubbing without constant intervention from you. It doesn’t use the pool’s pump and filter to work. The device has its own power source and filter bag for maximum independence. All you need is to plug its cable into a power outlet, drop it in the pool, and wait until it finishes cleaning.
Features of Dolphin M600 Robot Pool Cleaner
Here are the specs of this advanced cleaner:
- Caddy is included
- Weight is about 25 pounds
- Cable Length 18 m
- Motor unit voltage 24 VDC
- Cycle time 1.5 / 2 / 2.5 hours
- Advanced navigation
- One-touch operation power supply
- Smartphone App
- Combined brushes for all pool surfaces
- Swivel on cable prevents cable tangling
- Extra-large top access filter basket
- 3 Year Warranty
Dolphin M600 is the hybrid of Dolphin’s M and S Series. Like Dolphin Nautilus CC Supreme, this model is loaded with many features for a hassle-free pool cleaning experience. Plus, this device is engineered to perform better than other Dolphin models. Based on Maytonic’s estimation, Dolphin M600 delivers 25% more suction power than other brands.
On the top part, it has a large compartment for a filter basket that traps the debris and dirt from the pool water. After cleaning, you should remove the filter basket, take out the trash, and clean the filter; before putting it back. This procedure ensures that clog-free operation on the subsequent use. The filters catch ultrafine, medium, and large particles such as leaves and twigs.
In terms of navigation, M600 uses “Power Stream Technologies, ” enabling it to have a good grip on all surfaces. This technology is the reason why this machine can clean walls, stairs, and waterlines. An anti-tangle cable helps the M600 move around without getting stuck in one spot.
One exciting feature of this device is the “Pick Me Up” option of the MyDolphin Plus mobile app. With just a tap of your finger, you can command the robot to cunningly climb the closest wall and emerge from the water. Then, you can conveniently pick it up without pulling the cables and damaging the robot.
M600 can be connected to an iPhone or Android via Bluetooth or Wi-Fi. The first time you plug it in it will prompt you to download the MyDolphin Plus (not the old app). Once done, you need to set up an account in the app and connect to your Wi-Fi network later. These steps are pretty straightforward and should take less than five minutes. The device can connect to the Wi-Fi from 100′ away.
Aside from Wi-Fi, you can also connect to your phone using Bluetooth. Once the initial set-up is complete, it will look for a Bluetooth device as indicated by the flashing blue light in the control panel. You can pair your phone to the robot cleaner the same way you connect your phone to other devices.
You can do a lot of things using the app. The app allows you to set the timer, delay the schedule, and choose different cleaning cycles. The default cleaning mode lasts for two hours, cleaning the walls, floor, and waterline. The other cleaning mode is the “Ultra Clean” which also works for two hours but provides deeper cleaning.
When it comes to the actual cleaning, this model can filter 5,000 gallons/ hr. and with that amount, it can clean your pool faster than the other brands. The front scrubbers rotate 2x faster for better scouring of deep-seated dirt and algae. Its dual drive technology and 4 jets technology help the machine get to any part of the pool without getting stuck in a corner.
The filter effectively traps all sizes of dirt, including fine sands, leaves, and twigs. The filter bag is quite large, so it can store more dirt. The only disadvantage to having a big filter bag is that cleaning it can take a little more time.
Those who have tried this product have nice words on its ability to clean the waterline. Yes, M600 is probably the best water line cleaner in the market right now. Its back and side jets support the device as it climbs and scrubs the waterline like no other. If you’re preparing the pool for winter and want every inch clean, M600 is a good pick.
Although it’s not part of the device itself, it’s worthy to note that you can contact customer support with the app. Response time varies, but on average, it takes 24 hours to get a response.
- Provides superb cleaning, takes out any kind and size of debris;
- Can cover more than 90% of the pool area;
- Smooth transition from floor to wall, up to the waterline. It can climb up the stairs too!
- Doesn’t get stuck easily;
- Swivel cord;
- Can connect to either Wi-Fi or Bluetooth seamlessly;
- The app is loaded with helpful features.
- You need an iPhone or Android device to run the cleaner. If you don’t have one, consider the price you need to pay for the phone itself;
- Without the app, the control unit only allows you to choose one cleaning mode;
- There are some bugs on MyDolphin Plus app at times;
- The “Return to me” feature needs improvement.
The Dolphin M600 is a great product overall. It does an excellent job of cleaning the pool. The app has lots of useful functions for a hassle-free pool cleaning experience.